A number below 9.6 volts means your battery doesn’t hold a charge.
Try to start your quad and check the battery’s voltage. For this, you need a multimeter and a load-tester if you want the most accurate results.įirst, charge your battery to at least 75% (typically 12.4 volts). If your battery can’t hold enough of a charge, then you should do a load test. When you tried to start your ATV, you heard the click (or silence). After riding for a couple of hours, you stopped.
VIDEO FIX PULL ROPE HONDA ATV ENGINE HOW TO
Check out, How To Keep an ATV Battery Lasting for more info. Significant loss of voltage means you most likely it is time to replace your battery.īefore you go out and buy a new one, you might want to do some additional troubleshooting. Let the battery sit unused for a day or two and recheck the voltage. Then measure the voltage using a multimeter. To test for this, unplug the battery and charge it completely. Here are a few reasons this could be happening: Your Battery Is Old For now, we’ll assume the battery is the issue. If there is a single click, then you may have another problem with your ATV-the starter solenoid. One sign that the battery doesn’t have enough of a charge is multiple clicks in rapid succession. If you bought a cheap battery, do not expect it to last for more than a year or two. Your climate, how well you maintain it, and the quality of the battery affect its longevity. ATVs give batteries a workout, so it’s not uncommon for one to go bad after a couple of years. The Battery Needs To Be Charged or Replacedīattery problems are the number one reason ATV owners hear the dreaded click when trying to start their quads. If the connections are clean and tight, then it’s time to move on to the next possible problem. Also, check for corrosion on the battery terminals, and if you find some, clean it off. Sometimes the connections get knocked loose, especially if you’ve ridden some rough trails. Examine the connections to the battery and the starter. This is an easy solution to check for and fix. Your ATV is meant to be ridden, not sitting in the driveway, so let’s get to troubleshooting. If the battery is not the cause, the ATV probably has a faulty starter solenoid. The reasons for this are numerous, from loose connections to a current draw that drains the battery. Your ATV most likely clicks when you try to start it because of the battery. So, what can you do when your ATV doesn’t start? Instead of joining your friends as they go mudding, you now need to figure out how to make your quad start. When you try to start your ATV and you hear a click instead of the engine roaring to life, it’s more than annoying.